Whole House Point of Entry Carbon Water Filter System with UV

Premium whole house high flow GAC vessel system with high flow UV steriliser. Available in Manual back flush. Installed on mains plumbing, sediment and chlorine are removed from all taps and showers throughout the house, at 60 to 90 litres per minute, protecting tap washers, hot water systems and appliances. Comes complete with Almond colour suncover protector and GAC Granular Activated Carbon.

Available in 1" inlet and outlet ports

The manual backwash valve extends the life of the granular activated carbon media by enabling it to be back-washed and cleaned. All sediment and sludge is flushed to waste, either into the garden or storm water drain. Using this method the carbon media will last the average household three to four years, depending on water quality and usage.

Comes complete with a Premium HydROtwist 24GPM UV Steriliser.

The quality of drinking water can change with time and become contaminated with harmful bacteria. The HydROtwist UV system is a reliable, economical and chemical-free way to safeguard drinking water in any residential application. The HydROtwist UV system has been designed and tested to ensure quality drinking water is at everyone’s finger tips.

Features of the UV purification system

Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.

The system is easy to maintain and service.

Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.

*Installation is available in the Sydney metro region ONLY . If you are located out of the Sydney metro region or interstate we can supply details of a local plumber/installer after purchasing your filter system. Price above is for a standard installation within the Sydney Metro Area with water supply within 1.5m of installation point and tap/faucet installed on a laminate/wooden bench top or in a stainless steel sink. Non standard installations will incur an extra fee.

(Please Note: NON Standard Installations will incur an extra fee of $65.00 + any parts/fittings required - Granite, marble and/or stone benchtops will incur an additional fee of $45.00)

**Filter replacement service/maintenance is available in the Sydney metro region ONLY.

**This is only to be used as a guide. Water filters should be installed by a professional.